Bowers & Wilkins / B&W 704 Floor Standing Speakers in Rosewood
Bowers & Wilkins / B&W 704 Floor Standing Speakers in Rosewood. Beautiful speakers, both in appearance and sound. The way the wood cabinet tapers to the rear, getting both thinner and curving upwards with the nautilus tweeter protuding is stunning design.
I also have two matching B&W ASW750 1000w subwoofers. All together this makes up a truly impressive system that is gorgeous, sonically refined but brutal with bass when required! Speakers will be demonstrated upon collection. And for those who like detail, here's a review from Gramaphone magazine.
The smaller of two new B&W floorstanders, the 704s combine elegance with a superb sound, says Andrew Everard First printed in the May 2004 edition of Gramophone. Founded the better part of 40 years ago, B&W has established itself as one of the world's leading speaker manufacturers, and certainly the UK's most successful. And it has an enviable pedigree in the classical field: its original 801 speakers, launched in 1979, were rapidly adopted by classical studios, as were the Matrix 801 speakers 10 years later and I998's Nautilus 800 series. Many of the company's lower-priced models have drawn on the design of these flagship products; the new 700 Series is no exception.
Replacing the company's CDM NT range, the 700 Series is designed for both stereo and multichannel applications. B&W intend the main speakers to be used in conventional stereo systems or, combined with the centre, surround and subwoofer models, to build 5.1-, 6.1- or even 7.1-channel systems.
All the speakers are available in high-quality wood veneers and the wall-mountable DS7 surrounds come in black or white. The company has done its research: it uses state-of-the-art laser measurement technology to improve its understanding of drive unit materials and how they behave. And the drivers here use materials that will be familiar to those who have seen or heard B&W speakers of the recent past. It also uses a combination of an aluminium disc and a copper cap on the pole piece for better control of the magnetic forces within the speaker's motor system, B&W calling this combination'Balanced Drive'.
This mid/bass unit hands over to a paper/Kevlar diaphragm bass unit of the same size, having a gentle upper roll-off around 150Hz and going right down to 40Hz, while the treble above 4kHz is handled by a 25mm alloy dome tweeter, designed for good extension to look after DVD-A and SACD recordings. The cabinets for the 700 series come from the B&W factory in Denmark which makes the curved boxes for the 800 Series. The technology developed for the 800 helped to create the 700s' curved one-piece front baffled and top plate, adding strength and providing a solid platform for the tweeter, which is'free-mounted' in a pod and uses a Nautilus-style tapered tube behind the driver to offer better control. Talking of tapering, the 704s' cabinets taper from front to back within, avoiding standing waves and other box colorations, and the enclosures are extensively braced, and vented using I3&Ws Flowport tubes. These use'golfball' dimples to smooth the airflow within them, and the 704s have two ports: one in the front baffle, and one to the rear, with foam'plugs' provided to tame any wayward bass.
The 704 is an elegantly proportioned design: it stands just under 96cm tall, with that sloping top panel and pod-mounted tweeter making it look shorter than it is. Spikes and biwirable terminals are provided and the speakers present an easy load to an amplifier, thanks to 8ohm nominal impedance and 90B/W/m sensitivity. The speakers are best use with their main grilles removed, and you can also take the covers off the tweeter pods, but they're designed to sound just as good with the sleek moulding in place. Performance Alter a few days' use to get the speakers loosened up and settled at room temperature I spent some time moving them around the room, experimenting with those foam bungs and generally tweaking.To a great extent I needn't have bothered: there's an inherent rightness about the sound of the 704s that lets them deliver fine imaging and an open, unforced soundstage. In the interests of science I tried them on the end of a low-powered amplifier, and discovered that the 50-150W suggested input is no machismo on the part of the B&W designers: despite that relatively high sensitivity, the 704s thrive on a healthy dose of power and current. They'll make a noise with lower-powered amps, but switching to something with The new B&W 704s continue a great company tradition energy to spare gives a sound much better suited to the big, vibrant, easy music-making of which these speakers are capable.
That suggests they'll also work well with amps like the Musical Fidelity A3.2 integrated, or indeed the Exposure XXIII/ XXVIII pre/power amps (reviewed in March). And they do sing: connected to the TAG McLaren power amp and AV32R preamp/ processor, here running in two-channel mode, the B&Ws have a tight precision that's easy to admire. They image beautifully, and the sense of depth in the soundstage picture is excellent; I've rarely heard speakers do such a good job of disappearing, leaving the music spread before the listener, with so little faffing about needed to set them up.
Beyond that initial impression of lucidity and an entirely natural view of music where the percussive attack of, say, the piano is gorgeous, the B&Ws are equally capable with the big, lush orchestrations of Richard Rodgers on a 1992 John Mauceri-conducted Philips disc of his overtures. The way in which the overture to Carousel slowly gains momentum is thrilling on the B&Ws, which place the orchestra before the listener and hold the image rock solid and transparent as the music builds, subsides and grows again. The speakers are even more impressive with music theatre: the original 1979 cast recording of Sondheim's Sweeney Todd can sound rather brash and brittle in its 1990 CD reissue on some systems. But with the Michaelson Audio Chronos amps and B&Ws on the end of the Marantz CD7 player, the weight and power on tap offsets the rather strident top end.It can't flatter the strained vocals of Len Cariou in the title-role, but the passion of his performance comes over and the dynamic range and orchestral power are well represented. But what I like most about these speakers is that they've been designed for relatively wide dispersion - no less that 40° in the horizontal plane, no doubt with an eye to better integration in surround sound systems - and this means that excellent imaging and sense of soundstaging is maintained even when you move well away from the ideal listening'sweet spot'. These aren't for one listener to enjoy and the rest of the household to hate. Thanks to their high sensitivity, that well-engineered'two-and-a-half-way' design and a choice of wood finishes, the B&W 704s manage one of the hardest tricks in the loudspeaker world: they sound wonderful without taking over half of your room.
The engineers deserve full credit for making a compact, fine-looking loudspeaker with a sound that will please both demanding listeners and their families. Long and hard' would be the usual phrase to describe the process, but the B&Ws are such a delight to listen to that I suspect the time will fly by. Drive units: 25mm metal dome tweeter, 16.5cm woven Kevlar cone mid/bass unit, 16.5cm Kevlar/paper woofer Crossover. Biwirable, crossover points 150Hz and 4kHz. Frequency range 40Hz-25kHz +/-3dB on axis. Sensitivity 90dB/W/m Impedance 8ohm nominal, 4.1ohm minimum. Finishes available in black ash, cherry, maple,'rosenut' and walnut real wood veneers.Dimensions (H x W x D) 95.7 x 22.2 x 31.9cm. The item "Bowers & Wilkins / B&W 704 Floor Standing Speakers in Rosewood" is in sale since Monday, September 7, 2020.
This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Speakers & Subwoofers". The seller is "carole7911" and is located in Worthing.
This item can't be shipped, the buyer must pick up the item.