Floor Standing Speakers

Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak

Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak

Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak

Q Acoustics Concept 500 Floor Standing Speakers. Concept is the embodiment of all the technological advances we've made since we began, going beyond anything we've accomplished before. We truly believe these beautiful speakers deliver a performance never previously heard at these price points. The aim with the Concept series was to design the'quietest' cabinet possible.

From the pioneering GelcoreT cabinet construction, through to the Isolation Suspension System, these technologies deliver close to a resonance-free speaker design, as possible. Exceptional engineering inside the cabinet is matched by stunning design. The premium finishes - white or black lacquers, with dual gloss and Italian wood veneer also available for the 300 and 500 models - fits perfectly into any listening.

First introduced in our original Concept loudspeaker, the GelcoreT cabinet construction is designed to minimise high-frequency noise. A unique design consisting of a non-setting gel sandwiched between two individual layers, our specially developed adhesive converts the high-frequency vibrations generated by driver movement into heat, allowing for a focused and uncoloured audio.

A refinement of the hugely effective'isolation base' principle first fitted to Concept 300, the Concept 50 has an isolation suspension system in the form of a sprung baseplate. Two plates are separated by suspension'spheres' that effectively isolate the cabinet from interference caused by external vibrations. The result is tighter stereo imaging and greater low-frequency extension. P2P Point to Point Bracing. Q Acoustics P2PT (Point to PointT) bracing technology is used throughout the Concept loudspeaker range - it supports the parts of the cabinet that need to be stiffened, making the elegant enclosures exceptionally rigid.

This improves the focus of the stereo image, and gives the soundstage more accuracy than ever before. The Concept 50 and Concept 500 are, like all floorstanding loudspeakers, vulnerable to internal build-up of pressure that causes both unwanted standing waves and colouration. To prevent this occurring, specially designed HPET (Helmholtz Pressure EqualiserT) tubes are fitted inside the cabinet to nullify internal pressure and improve frequency response.

Each Concept model has bi-wire terminals on the rear of its cabinet. Using appropriate speaker cable, two pairs of cables can connect an amplifier to the speaker - one carries the high-frequency signal, the other carries midrange and low frequencies. Separating these frequencies minimises the intermodulation distortion that arises when using one length of cable to carry the entire frequency range. Frequency Response: 41Hz - 30kHz (±3dB).

Frequency Range: 38Hz - 29kHz (-6dB). Bass Reflex Tuning: 46.5Hz. Mid/Bass: 2 × 165mm coated paper cone drivers.

2 x Concept 500 floorstanding speaker. 2 x Owner's Manual.
Q Acoustics Concept 500 Large Floor standing Speakers White and Light Oak