Floor Standing Speakers

TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only

TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only

TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only
Item is collection only from postcode ML11 0FH, due to size/weight of speakers. A pair of TDL RTL2 Floor-standing Loudspeakers - Cira 2003. Please note: these speakers need to be used bi-wired; unless you have jump-leads to connect inputs. I sourced replacement Bass drivers from Lockwood Audio, the drivers are the later SE (or MkII) design. I also decided to go for a slightly better tweeter from Peerless (model no 811830) and new crossovers - the original crossovers were not designed for this set-up. In terms of the woodwork this is layers of hardboard and MDF glued together with contact adhesive, the method results in a very inert and stiff baffle compared to the original plain chipboard.

The same method of adding extra layers of glued hardboard and MDF was also applied to all the cabinet surface, apart from the bases (which are solid butchers block). The crossover is now mounted externally to aid.

The real light oak veneer and had the butcher block plinths have had two coats of PolyX Oil - the best oil for hardwood. All-in-all a significant sonic improvement, each speaker weighs around 20Kg - no lightweights by any means, good Bass response and accurate Treble (to my ears anyway). The last photo shows some original parts that will also be included in this listing. The tweeters are by Peerless and the Bass/mid drivers are TDL NOS. Both units have been used in the later Mk2 version.

Internally rewired with silver-plated OFC PTFE cable. Crossover mounted external, hardwired and upgraded with ClarityCaps on the tweeter section (indentation on one crossover cover, shown in 2nd last photo). The topology is the later Mk2 design. Extra laminated layers added to original chipboard cabinets to reduce resonance.

They are now very inert. Veneered in light oak, treated with PolyX Hard Wax oil. Please note there are some small cracks where the veneer has dried out and also few age-related marks and dings.

There is also some darkening on the top panels caused by sunlight. Overall though I think they look a lot better than the originals. Removable front baffle giving access to the drive units and damping material (should you wish to adjust this). Inverted drivers to angle the sound upwards. Solid wood plinths added to the base with inserts ready for spikes (not supplied).

Overall dimensions are now approximately 780mm high 220mm wide and 248mm deep (excluding the crossover box). This item is in the category "Sound & Vision\Home Audio & HiFi Separates\Speakers & Subwoofers".

The seller is "than702089" and is located in this country: GB. This item can be shipped to United Kingdom.

  • Model: RTL2
  • Colour: Light Oak
  • Connectivity: Wired
  • Type: Front Right and Left Speakers
  • Brand: TDL


TDL RTL2 Floor-standing Loudspeakers Upgraded/Modified Collection Only